If your home has low water pressure, it might be due to a number of common factors. If high water usage is the problem, you need to start tracking what you\’re doing when you turn on the tap that could be making your home run out of water. To avoid this dilemma, it might be good to install a low-flow showerhead and see if that makes a difference. In addition to high water usage, problems with plumbing and pipes could also cause your home\’s low pressure. If you have leaks, or if your pipes are rusting, you\’re likely going to see a dip in the supply of water coming into your home.
When you\’re experiencing low water pressure, the best thing to do is to check and see what\’s causing the problem. The problem could be controlled by something relatively simple, so finding out and fixing it fast will help keep your home useable while the problem is being dealt with from another point.
The following are 7 reasons why you may be experiencing low water pressure.
1] A leaking pipe
If your water is being wasted, the first place to check is the water meter. Most homes have two meters, one on the street and one inside. Check that meter for leaks or unusual readings before you check your home\’s pipes to see how much water is being used.
If your water bill is higher than usual or water is running down the street, you may leak your pipes. Leaks can be near an outside faucet, and they could even be in the pipes inside your walls. If that\’s the case, you may need to call a plumber to fix this problem.
2] Your toilet
Toilets can use quite a bit of water while they refill after being flushed. If you have a toilet that\’s not holding water, you\’ll be wasting a lot of water and make the water heater work overtime. It\’s typically recommended that people don\’t flush more than once every two or three days. If your toilet is flushing at least once per day, it may be time to get rid of it.
3] Your water heater
Water heaters are responsible for heating the cold water coming into your home, and they can use significant amounts of gas or electricity to do so. They also need to keep a constant temperature during the heating process, so if they aren\’t working right, you will have cold water that\’s not hot enough.
If the temperature of your water is too low, your water heater may not be working properly. You\’ll need to get it checked by an experienced professional plumber if you want your home back.
4] The drain
You might be paying to make sure your drains can handle a lot of water. If you\’re using too much water, your drains could be clogged with waste or food debris. If the problem persists, you\’ll need to call in a professional plumber to take care of it before you know what\’s causing your low-pressure problems.
5] The plumbing
Plumbing is one thing that can go wrong in just about any home. If an experienced professional plumber doesn\’t perform basic plumbing repairs, you\’re going to have plumbing issues. It\’s important to know when a plumber should be called, even if you\’re a handyman or woman and you think that you can handle the job.
6] Your pipes
Along with pipes, your home could blow or leak. If this happens, it usually means that there\’s either a structural problem in the pipes or something inside them is corroding. If you have high water usage and haven\’t added anything to your home that would cause this problem, your plumbing could cause your low water pressure.
7] Your showerhead
If you have a low-flow showerhead, it can take longer for the water to heat up. This might be making it harder for your whole home to have hot water at all times. Changing out your shower head is an easy way to fix this problem without seeing a significant drop in hot water usage.
If you would like to know more about fixing water pressure problems, please visit this page.
